Repair Manuals for Hotpoint Aquarius WF
Washing Machines

 

PDF manual £5.00 Each (Download)

Buy PDF Download Manual

Content & Information

Home Page

The Home Repair Manual listed for sale in this section is for the Hotpoint WF Models and the manual covers all of the listed model numbers shown below.

If you are looking for error code information relating to one of these machines or assistance in fault finding, or need to know how to repair your machine, you could find most of the answers you seek are in this manual.

It covers all the relavent error code information such as how to identify what the flashing lights signify and what area to look at regarding where the fault may be, plus how to access the component and what to look for in respect to the components failure, it also covers dismantling and rebuilding of the appliance in easy to follow steps as well as listing a number of faults and there solutions. The manual has easy to follow wiring charts that shows the connections from the module to the component and the relavent colours of the wires.    

  


Models covered:-WF000P/G/T..WF100P..WF210P/G/T..WF215A..WF220P/G/T..WF225A..WF240P..WF250P/G..WF310P/G/T..WF320P/G/T.

    WF325A..WF340P/G..WF350P/G..WF355A..WF430P/G/T..WF440P/G..WF445A..WF530P/G/T..WF540P/G/T..WF545A.


   

Contents of the manual are:

Meter Testing
A Continuity Test
Insulation Test
To test components individually
Intro

F01 Info in manual
F02 Info in manual
F03 Info in manual
F04 Info in manual
F05 Info in manual
F07 Info in manual
F08 Info in manual
F09 Info in manual
F10 Info in manual
F11 Info in manual
F12 Info in manual
F17 Info in manual

How a Washing Machine works
1 Components and some attributed faults
1.1 Motor
1.2 Pressure switch
1.3 Pressure Chamber
1.4 Control module
1.5 Heater
1.6 Thermistor
1.7 Pump
1.8 Sump
1.9 Stabiliser legs
1.10 Door seal
1.11 Fill valves
1.12 Fill hoses
1.13 Inner Drum
1.14 Pulley
1.15 Belt
1.16 Dispenser
1.17 Door switch/Interlock

Hotpoint home page for users’ handbook
2 What parts look like and there function in brief.

2.1 Control Module
2.2 Pressure Chamber
2.3 Pressure Switch
2.4 Fill Valves
2.5 Door Switch
2.6 Heater & Cut-out with Thermistor
2.7 Heater Guard
2.8 Tacho Generator / Motor
2.9 Pump
2.10 Sump Filter
2.11 Stabilizer Leg & Peg
2.12 Bearings & Water Seal
2.13 Belt
2.14 PCB and controls

Some Common Faults and Solutions
The machine does not switch on.
Door seal has mouldy black marks on it
Can’t open the door after wash has finished.
Machine will not always spin properly
The drum is stuck and will not turn.
Have to wait a long time for the door to open after a wash.
The drum turns before any water has gone in.
The belt keeps coming off
Drum stopped

Noisy
Machine is over filling
Machine keeps filling
Not taking in fabric conditioner
Water boils
Noisy on spin but fine on wash
Machine is banging and the door seal is twisting during wash
Drum lopsided
The Machine will not fill or operate
Machine Dismantle and Reassembly by stages.

(1) Top Cover….Removal
(1a) Top Cover…..Fitting
(2) Soap dispenser Draw…..Removal
(2a) Soap Dispenser Draw….Fitting
(3) Fascia Panel….Removal
(3a) Fascia Panel….Fitting
(4) PCB/Program Switch…..Removal
(4a) PCB/Program switch….Fitting
(5) Front Panel…Removal
(5a) Front Panel….Fitting
(6) Door Seal from container…Removal
(6a) Door Seal to container…Fitting
(7) Balance weights…Removal
(7a)Balance weights…Fitting
(8) Interlock/Door switch…Removal
(8a) Interlock/Door switch…Fitting
(9) Soap dispenser….Removal
(9a) Soap dispenser…..Fitting
(10) Pressure switch….Removal
(10a) Pressure switch…..Fitting
(11) Solenoid valves……Removal
(11a) Solenoid valves…..Fitting
(12) Pump….Removal
(12a) Pump….Fitting
(13) Sump / Pressure chamber….Removal
(13a) Sump / Pressure chamber….Fitting
(14) Motor…….Removal
(14a) Motor…….Fitting
(15) Stabilizer…….Removal
(15a) Stabilizer ……..Fitting
(16) Heater…….Removal
(16a) Heater…….Fitting
(17) Pulley….Removal
(17a)Pulley……Fitting
(18) Suspension springs………Removal
(18a) Suspension springs………Fitting
(19) Container / Outer drum………..Removal
(19a) Container / Outer drum….Fitting
(20) Inner drum……Removal
(20a) Inner drum………Fitting
(21) Bearings…….Removal
(21a) Bearings……..Fitting
(22)Door Assembly…..Removal/Dismantle
(22a) Door Assembly…..Fitting/Reassemble
(23)Drum lifter…..Removal
(23a)Drum lifter….Fitting
(24)Control Module…..Removal
(24a)Control Module…..Refitting
Control Module
Wiring Diagram