If you want to find error code information, please
click on the 'Error Code Look-up ' link, above.
If you want to know what the last recorded error
message on your machine was,(only applicable to certain models), please
click on the 'Last Error Recorded ' link, above.
The 'Additional Test Functions' link is a form of
information spring-board to other pages.
Hotpoint used 7 different modules
over a certain range of machines; the difference between each particular
model could be the deletion or addition of a component such as a solenoid
valve or temperature control potentiometer, but it could also be as
small as the wording on a control button.
These modules were made to work
on a number of particular models and were pre programmed in the factory
to do so, but they have to be configured on the machine for it to
We have put together a list of modules
and the machines they fit, along with the relevant configuration instructions.
It is possible to install a module from another machine within the
correct range and configure it to work on your appliance.
the models in each column use the same module and therefore can be
configured to work on any of the machines within that column.
These part numbers are correct as of 01/08/2011 but are susceptible
to change if the manufacturer sees fit.
This video will show how to replace
and reconfigure a module on any of the following listed models